Receivers
Dog Guard® offers three different types of Receivers that are designed to contain small to large-sized dogs. The three receivers are listed below, click their links for a detailed explanation:
|
 |
DG 9 XT
Features |
|
The DG 9 XT receiver is designed to handle the “medium
to stubborn and tough-to-train” dogs. It works
well with dogs that are runners such as Huskies,
Labs and hunting dogs.
Dimensions:
Width:
1.1875” • Height: 1.125” •
Length: 1.25”
Material: Lexan/ABS • Probe Spacing: 1.125”
• Weight: 2.2 oz.
|
 |
DG 5000 Features |
|
This DG 5000 receiver is designed to handle “small,
timid, passive and up to medium sized” dogs.
- This receiver is waterproof
and has a LIFE TIME warranty provided it was
not damaged or abused. Dog Chews are covered
under the LIFE TIME warranty. Your Dog Guard
professional dealer will show you ways to prevent
dog chews.
- The fail safe feature
shuts the receiver down 30 seconds after it
has been activated. The receiver will reset
itself once it has been removed from the signal
field for 3 seconds. This feature assures that
your pet will not be continuously stimulated
should he become caught in the signal field.
- The DG 5000 receiver
provides pulsating stimulus that your Dog Guard
professional dealer will adjust to your pet’s
temperament.
- This receiver can
be ordered in the encoded mode or in the non-encoded
mode; with or without a one-second delay.
- The receiver in the
encoded mode is immune to stray signals and
provides up to 32 levels of initial stimulation
that is controlled at the transmitter. When
the pet enters the first signal field, it will
receive a warning tone or stimulation. Should
the pet stray into the second signal zone, the
receiver will automatically increase to a stronger
stimulus. The maximum stimulus can be controlled
by using shunts.
- When ordered with
a one-second delay, the pet will receive a one-second
audible warning prior to stimulation; if he
does not retreat from the signal field, he will
receive a stimulus.
- It is available in
two frequencies.
Dimensions:
Width:
1.125” • Height: 1.125” •
Length: 2”
Material: Lexan/ABS • Probe Spacing: 1.125”
• Weight: 2 oz.
|
 |
DG Micro Features |
|
This DG Micro receiver is designed to contain
“tiny pets” weighing 1 to 10 pounds.
Dimensions:
Width:
1.125” • Height: 1” •
Length: 1.875”
Material: Lexan/ABS • Probe Spacing: 1.125”
• Weight: 1.8 oz. |